Mr Color Semi Gloss Ijn Gray

C35

Ijn Gray (Mitsubishi) (Semi-gloss lacquer series)

 

Mr. color Solvent-based acrylic resin paint 

Capacity: 10ml 

 

Details

Mr. Color is a standard model paint that has been highly evaluated by modelers all over the world for many years.

 

With a wide variety of colors, it can be used for painting many model genres such as characters and scales (tanks, airplanes, ships).

 

When painting with Mr. color, it is necessary to dilute it with a dilute solution for Mr. color as appropriate. The thin solution for Mr. color can also be used for cleaning brushes and airbrushes using Mr. color.

 

When painting Mr. color with a brush, it is recommended to apply one or two layers. When painting with a brush, it is basically not necessary to dilute with a dilute solution, but if it is difficult to apply, add a dilute solution little by little according to the viscosity of the paint.

 

When using an airbrush, apply a thin layer in two or three steps. When applying with an airbrush, dilute the paint with a ratio of paint 1: dilute solution 1 to 2 according to the viscosity of the paint.

 

For glossy Mr. color, the glossiness can be adjusted with the C30 flat base. For a semi-gloss finish, mix 5-10% of the paint with a flat base.

 

Also, if you mix 10 to 20% of the paint with a flat base, you will get a matte finish. By adjusting the proportion of flat base, you can adjust to various glossiness.